Differences

This shows you the differences between two versions of the page.

--- ffthemediumway [2026/06/04 16:36:23] – [Configuring a new interface] ThinkFly
+++ ffthemediumway [2026/06/17 16:39:43] (current) – dont disable the firewall ;) gabor
@@ Line 10: / Line 10: @@
   - Click on "Customize installed packages and/or first boot script".
   - Add the following packages to the list
 <file>curl mtr iperf3 tcpdump olsrd olsrd-mod-jsoninfo luci-app-olsr ethtool ipip kmod-ipip
 </file>
+    - {{:openwrt_xiaomi_ax6000_06042026.png?direct&800|}}
   - Copy the following script and paste it to "Script to run on first boot (uci-defaults)" on the image builder website
@@ Line 221: / Line 221: @@
 </file>
+   - Example: {{:install_packages_script_to_run_on_file.png?direct&800|}}
   - Click on "Request Build" and wait for the build to complete.
   - Download the newly built custom sysupgrade image
+    - {{:custom_openwrt_firmware_06042026.png?direct&800|}}
   - Log in to your router using the web interface ([[http://192.168.1.1|http://192.168.1.1]])
   - Go to "System->Backup/Flash Firmware"
@@ Line 231: / Line 232: @@
   - Untick the box "Keep settings and retain the current configuration"
   - Click "Continue"
+    - Note: if you can't log into the web interface, you can use "WinSCP" to upload the firmware
+      - upload the firmware 'openwrt-25.12.4-a89c348c9670-qualcommax-ipq50xx-xiaomi_ax6000-squashfs-sysupgrade.bin' to **/tmp** folder
+      - SSH to the router (e.g., Putty)
+        - Flash the firmware with the following command
+        - <file> sysupgrade -n -v /tmp/openwrt-25.12.4-a89c348c9670-qualcommax-ipq50xx-xiaomi_ax6000-squashfs-sysupgrade.bin </file>
+      - Once flashing finished, you can log into the web interface ([[http://192.168.10.1|http://192.168.10.1]])
@@ Line 240: / Line 249: @@
 ===== Configuring a new interface =====
   - Click on 'Network->Interfaces'
-  - Click on the 'Interfaces' tab
+    - Add a new Network
-  - Add a new Network
+      - Name: The name of the remote location [any name, for example 'ffste87']
-    - Name: The name of the remote location [any name, for example 'ffste87']
+      - Protocol: Static address
-    - Protocol: Static address
+      - Device: choose the port you want to use for the new connection
-    - Device: choose the port you want to use for the new connection
+        - Ethernet Adapter"wan" (ffste87") [this is the port you connect to the antenna]
-      - Ethernet Adapter"wan" (ffste87") [this is the port you connect to the antenna]
+          - {{:interface_06042026-2.png?direct&600|}}
-    - Set the IP address according to the Manman database
+      - Set the IP address according to the Manman database
-      - [[https://manman.ffgraz.net/|https://manman.ffgraz.net/]]
+        - [[https://manman.ffgraz.net/|https://manman.ffgraz.net/]]
-      - for example:
+        - for example:
-        - IP: 10.12.xxx.145
+          - IP: 10.12.xxx.145
-        - Netmask: 255.255.255.252
+          - Netmask: 255.255.255.252
-        - at the IpV4 address, input "10.12.xxx.145/30" [/30 is the netmask .252]
+          - at the IpV4 address, input "10.12.xxx.145/30" [/30 is the netmask .252]
+    - {{:interface_06042026-1.png?direct&800|}}
   - Click on 'Services->OLSR IPv4'
     - Add a new interface
@@ Line 257: / Line 267: @@
         - in this example, the network is "ffste87"
       - Click Save
+        - {{:interface_06042026-3.png?direct&600|}}
   - Go to the tab HNA Announcements [Services->OLSR IPv4->HNA Announcements]
     - Add a new announcement
@@ Line 269: / Line 280: @@
         - {{:firewall_settti_06042026-1.png?direct&400|}}
       - Click 'save and apply'
-    - make sure all the input|output|forward is 'accept'
+  - If everything setup correctly, open ''http://192.168.10.1/cgi-bin/luci/'', you shall see it like this
-      - {{:firewall_setting_06042026.png?direct&800|}}
+    - {{:overview_06042026.png?direct|}}
 ===== TODO: add interfaces for olsrd, setup olsrd, setup wifi, setup free wifi =====
+===== Setup OLSRD & Add Interfaces for OLSRD =====
+  - Open software "WinSCP", connect to the router [192.168.10.1] by scp
+    - {{:winscp_06042026.png?direct&600|}}
+    - enter the folder /etc/config/
+    - edit the file 'olsrd', replace the content with the following text
+      - <file>
+config olsrd
+config LoadPlugin
+	option library 'olsrd_arprefresh.so.0.1'
+config LoadPlugin
+	option library 'olsrd_dyn_gw.so.0.5'
+config LoadPlugin
+	option library 'olsrd_httpinfo.so.0.1'
+	option port '1978'
+	list Net '0.0.0.0 0.0.0.0'
+config LoadPlugin
+	option library 'olsrd_nameservice.so.0.4'
+config LoadPlugin
+	option library 'olsrd_jsoninfo'
+	option accept '0.0.0.0'
+	option ignore '0'
+config procd 'procd'
+	option respawn_threshold '3600'
+	option respawn_timeout '15'
+	option respawn_retry '0'
+config InterfaceDefaults
+	option Mode 'ether'
+	option Ip4Broadcast '255.255.255.255'
+config Interface
+	option ignore '0'
+	option interface 'ffste87 [!!! *************** replace this to your network name!!! *****************]'
+config Hna4
+	option netaddr '10.12.!!!**************xxx use your ip*******************!!!.144'
+	option netmask '255.255.255.252'
+</file>
+  - Go back to the router web interface ''http://192.168.10.1/cgi-bin/luci/admin''
+    - 'Services -> OLSR IPv4  -> Interface', now you shall have this additional interface named 'ffste87'
+      - {{:interface_06042026-3.png?direct&600|}}
+===== Setup WiFi =====
+  - Go to 'Network -> Wireless'
+    - In this example, the WiFi was set to 'SSID: ST8'
+    - {{:wifi_06042026_st88-3.png?direct&600|}}
+    - Click 'Edit -> Interface Configuration -> General Setup'
+      - ESSID: any name for your WiFi, here it is 'ST8'
+      - Network: use the network you set before, here it is **'ffste87'**
+        - {{:wifi_06042026_st88-1.png?direct&600|}}
+      - To set the password of the wifi, click 'Interface Configuration -> Wireless Security'
+        - Encryption: anyone you like
+        - Key: this is your wifi password
+        - {{:wifi_06042026_st88-2.png?direct&600|}}
+      - Click 'Save & Apply'
+      - Connect to the WiFi with your mobile device, it should work now.
 ===== Baustellen-seite für funkfeuer configs =====
 [[ffconfigbaustelle|Link]]