Differences

This shows you the differences between two versions of the page.

--- ffthemediumway [2026/06/04 17:00:14] – [Setup OLSRD] ThinkFly
+++ ffthemediumway [2026/06/17 16:39:43] (current) – dont disable the firewall ;) gabor
@@ Line 10: / Line 10: @@
   - Click on "Customize installed packages and/or first boot script".
   - Add the following packages to the list
 <file>curl mtr iperf3 tcpdump olsrd olsrd-mod-jsoninfo luci-app-olsr ethtool ipip kmod-ipip
 </file>
+    - {{:openwrt_xiaomi_ax6000_06042026.png?direct&800|}}
   - Copy the following script and paste it to "Script to run on first boot (uci-defaults)" on the image builder website
@@ Line 221: / Line 221: @@
 </file>
+   - Example: {{:install_packages_script_to_run_on_file.png?direct&800|}}
   - Click on "Request Build" and wait for the build to complete.
   - Download the newly built custom sysupgrade image
+    - {{:custom_openwrt_firmware_06042026.png?direct&800|}}
   - Log in to your router using the web interface ([[http://192.168.1.1|http://192.168.1.1]])
   - Go to "System->Backup/Flash Firmware"
@@ Line 231: / Line 232: @@
   - Untick the box "Keep settings and retain the current configuration"
   - Click "Continue"
+    - Note: if you can't log into the web interface, you can use "WinSCP" to upload the firmware
+      - upload the firmware 'openwrt-25.12.4-a89c348c9670-qualcommax-ipq50xx-xiaomi_ax6000-squashfs-sysupgrade.bin' to **/tmp** folder
+      - SSH to the router (e.g., Putty)
+        - Flash the firmware with the following command
+        - <file> sysupgrade -n -v /tmp/openwrt-25.12.4-a89c348c9670-qualcommax-ipq50xx-xiaomi_ax6000-squashfs-sysupgrade.bin </file>
+      - Once flashing finished, you can log into the web interface ([[http://192.168.10.1|http://192.168.10.1]])
@@ Line 271: / Line 280: @@
         - {{:firewall_settti_06042026-1.png?direct&400|}}
       - Click 'save and apply'
-    - make sure all the input|output|forward is 'accept'
-      - {{:firewall_setting_06042026.png?direct&800|}}
   - If everything setup correctly, open ''http://192.168.10.1/cgi-bin/luci/'', you shall see it like this
     - {{:overview_06042026.png?direct|}}
@@ Line 278: / Line 285: @@
 ===== TODO: add interfaces for olsrd, setup olsrd, setup wifi, setup free wifi =====
-==== Setup OLSRD ====
+===== Setup OLSRD & Add Interfaces for OLSRD =====
   - Open software "WinSCP", connect to the router [192.168.10.1] by scp
     - {{:winscp_06042026.png?direct&600|}}
     - enter the folder /etc/config/
     - edit the file 'olsrd', replace the content with the following text
-      - config olsrd\\ \\ config LoadPlugin\\ 	option library 'olsrd_arprefresh.so.0.1'\\ \\ config LoadPlugin\\ 	option library 'olsrd_dyn_gw.so.0.5'\\ \\ config LoadPlugin\\ 	option library 'olsrd_httpinfo.so.0.1'\\ 	option port '1978'\\ 	list Net '0.0.0.0 0.0.0.0'\\ \\ config LoadPlugin\\ 	option library 'olsrd_nameservice.so.0.4'\\ \\ config LoadPlugin\\ 	option library 'olsrd_jsoninfo'\\ 	option accept '0.0.0.0'\\ 	option ignore '0'\\ \\ config procd 'procd'\\ 	option respawn_threshold '3600'\\ 	option respawn_timeout '15'\\ 	option respawn_retry '0'\\ \\ config InterfaceDefaults\\ 	option Mode 'ether'\\ 	option Ip4Broadcast '255.255.255.255'\\ \\ config Interface\\ 	option ignore '0'\\ 	option interface '**ffste87 [!!!replace this to your network name!!!**]'\\ \\ config Hna4\\ 	option netaddr '**10.12.xxx!!!use your ip!!!**.144'\\ 	option netmask '255.255.255.252'
+      - <file>
-  - Go back to the router web interface
+config olsrd
+config LoadPlugin
+	option library 'olsrd_arprefresh.so.0.1'
+config LoadPlugin
+	option library 'olsrd_dyn_gw.so.0.5'
+config LoadPlugin
+	option library 'olsrd_httpinfo.so.0.1'
+	option port '1978'
+	list Net '0.0.0.0 0.0.0.0'
+config LoadPlugin
+	option library 'olsrd_nameservice.so.0.4'
+config LoadPlugin
+	option library 'olsrd_jsoninfo'
+	option accept '0.0.0.0'
+	option ignore '0'
+config procd 'procd'
+	option respawn_threshold '3600'
+	option respawn_timeout '15'
+	option respawn_retry '0'
+config InterfaceDefaults
+	option Mode 'ether'
+	option Ip4Broadcast '255.255.255.255'
+config Interface
+	option ignore '0'
+	option interface 'ffste87 [!!! *************** replace this to your network name!!! *****************]'
+config Hna4
+	option netaddr '10.12.!!!**************xxx use your ip*******************!!!.144'
+	option netmask '255.255.255.252'
+</file>
+  - Go back to the router web interface ''http://192.168.10.1/cgi-bin/luci/admin''
     - 'Services -> OLSR IPv4  -> Interface', now you shall have this additional interface named 'ffste87'
       - {{:interface_06042026-3.png?direct&600|}}
+===== Setup WiFi =====
+  - Go to 'Network -> Wireless'
+    - In this example, the WiFi was set to 'SSID: ST8'
+    - {{:wifi_06042026_st88-3.png?direct&600|}}
+    - Click 'Edit -> Interface Configuration -> General Setup'
+      - ESSID: any name for your WiFi, here it is 'ST8'
+      - Network: use the network you set before, here it is **'ffste87'**
+        - {{:wifi_06042026_st88-1.png?direct&600|}}
+      - To set the password of the wifi, click 'Interface Configuration -> Wireless Security'
+        - Encryption: anyone you like
+        - Key: this is your wifi password
+        - {{:wifi_06042026_st88-2.png?direct&600|}}
+      - Click 'Save & Apply'
+      - Connect to the WiFi with your mobile device, it should work now.
 ===== Baustellen-seite für funkfeuer configs =====
 [[ffconfigbaustelle|Link]]