Differences

This shows you the differences between two versions of the page.

--- ffthemediumway [2026/06/04 17:18:30] – [Setup OLSRD & Add Interfaces for OLSRD] ThinkFly
+++ ffthemediumway [2026/06/17 16:39:43] (current) – dont disable the firewall ;) gabor
@@ Line 10: / Line 10: @@
   - Click on "Customize installed packages and/or first boot script".
   - Add the following packages to the list
 <file>curl mtr iperf3 tcpdump olsrd olsrd-mod-jsoninfo luci-app-olsr ethtool ipip kmod-ipip
 </file>
+    - {{:openwrt_xiaomi_ax6000_06042026.png?direct&800|}}
   - Copy the following script and paste it to "Script to run on first boot (uci-defaults)" on the image builder website
@@ Line 221: / Line 221: @@
 </file>
+   - Example: {{:install_packages_script_to_run_on_file.png?direct&800|}}
   - Click on "Request Build" and wait for the build to complete.
   - Download the newly built custom sysupgrade image
+    - {{:custom_openwrt_firmware_06042026.png?direct&800|}}
   - Log in to your router using the web interface ([[http://192.168.1.1|http://192.168.1.1]])
   - Go to "System->Backup/Flash Firmware"
@@ Line 231: / Line 232: @@
   - Untick the box "Keep settings and retain the current configuration"
   - Click "Continue"
+    - Note: if you can't log into the web interface, you can use "WinSCP" to upload the firmware
+      - upload the firmware 'openwrt-25.12.4-a89c348c9670-qualcommax-ipq50xx-xiaomi_ax6000-squashfs-sysupgrade.bin' to **/tmp** folder
+      - SSH to the router (e.g., Putty)
+        - Flash the firmware with the following command
+        - <file> sysupgrade -n -v /tmp/openwrt-25.12.4-a89c348c9670-qualcommax-ipq50xx-xiaomi_ax6000-squashfs-sysupgrade.bin </file>
+      - Once flashing finished, you can log into the web interface ([[http://192.168.10.1|http://192.168.10.1]])
@@ Line 271: / Line 280: @@
         - {{:firewall_settti_06042026-1.png?direct&400|}}
       - Click 'save and apply'
-    - make sure all the input|output|forward is 'accept'
-      - {{:firewall_setting_06042026.png?direct&800|}}
   - If everything setup correctly, open ''http://192.168.10.1/cgi-bin/luci/'', you shall see it like this
     - {{:overview_06042026.png?direct|}}
@@ Line 346: / Line 353: @@
         - {{:wifi_06042026_st88-2.png?direct&600|}}
       - Click 'Save & Apply'
-      - Try to connect to the WiFi with your mobile device.
+      - Connect to the WiFi with your mobile device, it should work now.
 ===== Baustellen-seite für funkfeuer configs =====
 [[ffconfigbaustelle|Link]]