Differences

This shows you the differences between two versions of the page.

--- routerosbaseconfig [2025/01/30 17:03:08] – gabor
+++ routerosbaseconfig [2026/05/05 09:12:29] (current) – better device names gabor
@@ Line 1: / Line 1: @@
-/* page was renamed from MikroTikSwitchRouterOS */
-<<[[:TableOfContents|TableOfContents]]>>
 ====== Important Notes ======
@@ Line 9: / Line 4: @@
   * MikroTik Devices have the default IP 192.168.88.1/24
   * The default username is admin with an empty password.
-  * For detailed information about RouterOS see [[[https://help.mikrotik.com/docs|RouterOS|Documentation]]]
+  * For detailed information about RouterOS see [[https://help.mikrotik.com/docs|RouterOS Documentation]]
@@ Line 16: / Line 11: @@
 ===== Configuration methods =====
-MikroTik devices can be configured in multiple ways: the webinterface, winbox (native app), SSH or serial console. In this guide the webinterface is used, configuration via winbox is very similar. The advantage of winbox is that it can use MAC-Telnet to connect to the device. This is convenient since the device is accessible even if there is no IP address assigned on the interface the managing computer is connected to.
+MikroTik devices can be configured in multiple ways: WebFig (the webinterface), WinBox (native app), SSH or serial console. In this guide the WebFig is used, configuration via WinBox is very similar. The advantage of WinBox is that it can use MAC-Telnet to connect to the device. This is convenient since the device is accessible even if there is no IP address assigned on the interface the managing computer is connected to.
@@ Line 25: / Line 20: @@
   * Set the netmask to 255.255.255.0 (/24)
   * Open [[http://192.168.88.1|http://192.168.88.1]] in your browser
-  * Log in (username: admin with no password) and click on [[:WebFig|WebFig]] in the top right corner.
+  * Log in (username: admin with no password) and click on WebFig in the top right corner.
@@ Line 31: / Line 26: @@
   * Check the architecture of your device. You can find this under Specifications on the MikroTik website, the product page for your device.
-  * Achitectures of some commonly used devices:
+  * Architectures of some commonly used devices:
-    * CRS112-8P-4S-IN (8-port PoE switch): **MIPSBE**
+    * CRS112-8P-4S-IN (8-port PoE switch): MIPSBE
-    * RBwAPG-60ad(-A) (60GHz AP/CPE): **ARM 32bit**
+    * wAP 60G - RBwAPG-60ad(-A) (60GHz AP/CPE): ARM 32bit
-    * CubeG-5ac60ay (60GHz PtP): **ARM 32bit**
+    * Cube 60 Pro ac - CubeG-5ac60ay (60GHz PtP): ARM 32bit
-    Download the newest stable RouterOS version from the [[[https://mikrotik.com/download|MikroTik|website]]]
+    * Download the newest stable RouterOS version from the [[https://mikrotik.com/download|MikroTik website]]
-    In [[:WebFig|WebFig]], click on Files in the left main menu.
+    * For devices with a wireless radio (2.4GHz, 5GHz or 60GHz), the extra package 'wireless' is required. **Otherwise the wireless radio will not be active after reboot. Be careful not to lock yourself out by upgrading remote devices and forgetting the wireless package.**
-    Upload the RouterOS firmware image (.npk file) into the root directory.
+    * In WebFig, click on Files in the left main menu.
-    Reboot the device (System->Reboot), the update should be applied automatically.
+    * Upload the RouterOS firmware image (e.g. '' routeros-7.17-arm.npk '' ) into the root directory.
+    * Upload wireless package (e.g. '' wireless-7.17-arm.npk '' ) to the root directory.
+    * Reboot the device (**System->Reboot**), and wait for the upgrade to finish.
 ===== Initial configuration =====
-  * Set a password: System->Password
+  * Set a password: **System->Password**
-  * Set the hostname: System->Identity
+  * Set the DNS server: **IP->DNS**
-  * Set the DNS server: IP->DNS
     * This is needed for software updates.
     * Funkfeuer Graz provides a DNS server at 10.12.0.10
-    Setup the NTP Client: System->SNTP Client
+    Setup the NTP Client: **System->SNTP** Client
     * Primary NTP Server: at.pool.ntp.org
     * Enable the SNTP client
+    Set the hostname: **System->Identity**
+This can be done via the command line as well:
+<file>/password
+</file>
+<file>/ip/dns/set servers=10.12.0.10
+/system/ntp/client/servers/add address=at.pool.ntp.org
+/system/ntp/client/set enabled=yes
+/system/identity/set name=changeme
+</file>
-====== Bridge and VLAN configuration ======
+====== Further configuration ======
-Extending the ports of a router is the most common usecase for a managed switch at a funkfeuer node. A router (e.g. [[:EdgeRouter|EdgeRouter]]) is connected to one port of the switch and can access other ports of the switch separately. This is done via VLANs: the router is on a trunk port, other (wireless) devices are on access ports. See the RouterOS Documentation on [[[https://help.mikrotik.com/docs/spaces/ROS/pages/28606465/Bridge+VLAN+Table#BridgeVLANTable-Trunk%2FAccessportsetup|Bridge|VLAN Tables]]] for further explanation. First it is advisable to create a VLAN table in the documentation(!) of your node (e.g. a wiki page).
+  * [[MikroTikWirelessLinks|For 5GHz/60GHz devices]]
+  * [[MikroTikSwitchRouterOS|For Switches]]