Differences

This shows you the differences between two versions of the page.

--- routerosbaseconfig [2026/05/25 16:05:41] – use funkfeuer ntp gabor
+++ routerosbaseconfig [2026/05/25 16:33:43] (current) – [Firmware upgrade] minor fixes gabor
@@ Line 28: / Line 28: @@
   * Architectures of some commonly used devices:
     * CRS112-8P-4S-IN (8-port PoE switch): MIPSBE
-    * wAP 60G - RBwAPG-60ad(-A) (60GHz AP/CPE): ARM 32bit
+    * wAP 60G - RBwAPG-60ad(-A) (60GHz AP/STA): ARM 32bit
     * Cube 60 Pro ac - CubeG-5ac60ay (60GHz PtP): ARM 32bit
+    * SXTsq 5 ax - SXTsq-5axD (5GHz AP/STA): ARM 32bit
-    * Download the newest stable RouterOS version from the [[https://mikrotik.com/download|MikroTik website]]
+  * Download the newest stable RouterOS version from the [[https://mikrotik.com/download|MikroTik website]]
-    * For devices with a wireless radio (2.4GHz, 5GHz or 60GHz), the extra package 'wireless' is required. **Otherwise the wireless radio will not be active after reboot. Be careful not to lock yourself out by upgrading remote devices and forgetting the wireless package.**
+  * For devices with a wireless radio (2.4GHz, 5GHz or 60GHz), the extra package 'wireless' or 'wifi-qcom' is required (see the [[https://help.mikrotik.com/docs/spaces/ROS/pages/1409138/Wireless|Mikrotik Documentation]]). **Otherwise the wireless radio will not be active after reboot. Be careful not to lock yourself out by upgrading remote devices and forgetting the wireless package.**
-    * In WebFig, click on Files in the left main menu.
+  * In WebFig, click on Files in the left main menu.
-    * Upload the RouterOS firmware image (e.g. '' routeros-7.17-arm.npk '' ) into the root directory.
+  * Upload the RouterOS firmware image (e.g. '' routeros-7.17-arm.npk '' ) into the root directory.
-    * Upload wireless package (e.g. '' wireless-7.17-arm.npk '' ) to the root directory.
+  * Upload wireless or wifi-qcom package (e.g. '' wireless-7.17-arm.npk '' ) to the root directory.
-    * Reboot the device (**System->Reboot**), and wait for the upgrade to finish.
+  * Reboot the device (**System->Reboot**), and wait for the upgrade to finish.
 ===== Initial configuration =====
+==== GUI ====
   * Set a password: **System->Password**
   * Set the DNS server: **IP->DNS**
@@ Line 46: / Line 47: @@
     * Funkfeuer Graz provides a DNS server at 10.12.0.10
-    Setup the NTP Client: **System->SNTP** Client
+  * Setup the NTP Client: **System->SNTP** Client
-    * Primary NTP Server: at.pool.ntp.org
+    * Primary NTP Server: ntp.ffgraz.net
     * Enable the SNTP client
-    Set the hostname: **System->Identity**
+  * Set the hostname: **System->Identity**
-This can be done via the command line as well:
+==== CLI ====
+Configuration can be done via the command line as well:
 <file>/password