Differences

This shows you the differences between two versions of the page.

--- routerosbaseconfig [2026/05/25 16:27:08] – [Initial configuration] gabor
+++ routerosbaseconfig [2026/05/25 16:33:43] (current) – [Firmware upgrade] minor fixes gabor
@@ Line 28: / Line 28: @@
   * Architectures of some commonly used devices:
     * CRS112-8P-4S-IN (8-port PoE switch): MIPSBE
-    * wAP 60G - RBwAPG-60ad(-A) (60GHz AP/CPE): ARM 32bit
+    * wAP 60G - RBwAPG-60ad(-A) (60GHz AP/STA): ARM 32bit
     * Cube 60 Pro ac - CubeG-5ac60ay (60GHz PtP): ARM 32bit
+    * SXTsq 5 ax - SXTsq-5axD (5GHz AP/STA): ARM 32bit
-    * Download the newest stable RouterOS version from the [[https://mikrotik.com/download|MikroTik website]]
+  * Download the newest stable RouterOS version from the [[https://mikrotik.com/download|MikroTik website]]
-    * For devices with a wireless radio (2.4GHz, 5GHz or 60GHz), the extra package 'wireless' is required. **Otherwise the wireless radio will not be active after reboot. Be careful not to lock yourself out by upgrading remote devices and forgetting the wireless package.**
+  * For devices with a wireless radio (2.4GHz, 5GHz or 60GHz), the extra package 'wireless' or 'wifi-qcom' is required (see the [[https://help.mikrotik.com/docs/spaces/ROS/pages/1409138/Wireless|Mikrotik Documentation]]). **Otherwise the wireless radio will not be active after reboot. Be careful not to lock yourself out by upgrading remote devices and forgetting the wireless package.**
-    * In WebFig, click on Files in the left main menu.
+  * In WebFig, click on Files in the left main menu.
-    * Upload the RouterOS firmware image (e.g. '' routeros-7.17-arm.npk '' ) into the root directory.
+  * Upload the RouterOS firmware image (e.g. '' routeros-7.17-arm.npk '' ) into the root directory.
-    * Upload wireless package (e.g. '' wireless-7.17-arm.npk '' ) to the root directory.
+  * Upload wireless or wifi-qcom package (e.g. '' wireless-7.17-arm.npk '' ) to the root directory.
-    * Reboot the device (**System->Reboot**), and wait for the upgrade to finish.
+  * Reboot the device (**System->Reboot**), and wait for the upgrade to finish.