standort:plueddemanngasse18
This is an old revision of the document!
Table of Contents
Nodes
Edge Router (er-x-sfp)
- Type: Ubiquiti EdgeRouter X SFP
- Manman: Node|"pl18"]
- PoE: 5x Passives PoE 24V max. 12W pro Port. Max 24W insgesamt
- Port-Assignment
| Port | VLAN | PoE | Gerät | IP / Netzwerk / HNA |
| eth0 | off | frei | ||
| eth1 | 101 | 24V | MikroTik RB CubeG-5ac60ay | DHCP Server 10.12.210.200/30|http://10.12.210.202/|10.12.210.200/30] |
| eth2 | 102 | 24V | MikroTik mANTbox 5GHz | DHCP Server 10.12.210.196/30|http://10.12.210.198/|10.12.210.196/30] |
| eth3 | off | frei | DHCP Client | |
| eth4 | off | TP-Link WAN-Port | DHCP Server 192.168.19/24|http://192.168.19.1/|192.168.19/24] | |
| eth5 (sfp) |
* VLAN-Assignment
| VLAN | Description |
| 101 | v-60g |
| 102 | v-5g |
| 200 | mgmt |
* Einrichtung penibelst nach Edge-Router-Anleitung von AJ!
MikroTik RB CubeG-5ac60ay
- IP/Address dynamic interface “bridge”
- Ausrichtung zu Steyrergasse|30]
- getestete Bandbreite
- 900Mbit zu stg30
- 70Mbit ins Internet
Mikrotik mANTbox 5GHz
- IP/Address dynamic interface “bridge”
- Ausrichtung noch unbestimmt
Interner Router TP-Link TL-WR841N/ND v11
- DHCP Client an WAN (“Use default gateway”, “Use DNS servers advertised by peer”)
- DHCP Client an LAN (no “Use default gateway”, no “Use DNS servers advertised by peer”)
- Verbinde mit: ssh -oHostKeyAlgorithms=+ssh-rsa root@192.168.1.98
- Verbindung zu Haupt-Router 192.168.1.1
- Config “/etc/config/network”
` config route
- option interface 'lan' option target '10.12.0.0/16' option gateway '192.168.1.98'
config route
- option interface 'lan' option target '192.168.19.0/24' option gateway '192.168.1.98'
config route '0xff'
- option interface 'lan' option target '0.0.0.0/0' option gateway '192.168.1.98' option metric '100'
`
standort/plueddemanngasse18.1695853590.txt · Last modified: by MathiasMayrhofer