You can't save spelling words.

Clear message
Locked History Actions

HelpOnInstalling/ApacheOnLinux

This page describes the particular steps that need to be taken to create a wiki instance using MoinMoin on Linux with the Apache web server. You should have already performed the ../BasicInstallation. Installations on other Unices like FreeBSD are very similar.

On this page two installation scenarios are discussed:

  1. You have Administrator Rights (you are user 'root' or may use sudo) for a server and are able to install and modify files almost anywhere on the machine, and notably able to modifiy the Apache configuration.

  2. You are a Simple User, only able to write files into your home directory, and unable to alter the master Apache configuration file.

The following options are not mentioned here:

Table of contents

Administrator Scenario

The exact location of the various Apache configs varies - often used locations are: /etc/httpd/, /etc/apache/ or /etc/apache2/. You should have at least some know-how of how to set up and deal with Apache, especially when it comes to virtual host setup. If you do not know what we are talking about, please read about Configuration Files and Apache Virtual Host documentation in the Apache documentation.

On Apache2 it is quite usual to have a directory (like /etc/httpd/conf.d) for virtual hosts. So every file ending with .conf will be included into the main Apache configuration file. To look if this is true for your configuration, search for the word "Include".

Create a wiki instance

Creating a wiki instance involves copying files around and setting appropriate permissions. Before you can proceed, you need to know what user and group your Apache server runs as. The easiest way to know this is to issue this command:

> egrep "^User|^Group" /etc/httpd/httpd.conf
User wwwrun
Group nogroup

This shows a typical result: "wwwrun.nogroup". Other common results are "nobody.nogroup", "apache.apache" and "www-data.www-data". You can of course use your own. What matters is that you know which ones are in use, because you will need them to set file permissions.

Once you have gathered this information, read ../WikiInstanceCreation and follow the steps described there.

Install moin.cgi

There is one last file you need to copy, the bridge between Apache and MoinMoin: the CGI script that Apache will call every time a wiki page is requested, and that will in turn invoke all the MoinMoin components to handle the request. You can actually put this script anywhere you like (all the paths to the files MoinMoin needs can be configured to match your filesystem layout), but for the sake of simplicity and security, we suggest you follow the instructions below, unless you think you know better.

We will create a cgi-bin subdirectory in the instance directory. Using the environment variables defined in ../WikiInstanceCreation, run the following commands:

> cd $WIKILOCATION/$INSTANCE
> mkdir cgi-bin
> cp $SHARE/server/moin.cgi cgi-bin
> chown -R $USER.$GROUP cgi-bin
> chmod -R ug+rx cgi-bin
> chmod -R o-rwx cgi-bin

Configure moin.cgi

When moin.cgi is launched, it imports a MoinMoin module that in turn imports other modules and the configuration file. While the MoinMoin modules should always be found in a properly configured system (as described in ../BasicInstallation), it is likely that the configuration file will not be found. Edit the moin.cgi script to correct that. Add these lines near the top of the file:

import sys
sys.path.insert(0, '..')

An even better way is to use the absolute path name of the directory that contains the wikiconfig.py file instead of '..'.

Configure Apache

Now that every file is in place and properly locked down (as far as the filesystem is concerned), we need to configure Apache so that it offers access to the right files, and no others. However, since the default Apache configuration varies a lot depending on the distribution you use, and since administrators often make important additions and changes to it, we cannot give exact instructions that cover all cases. Instead, we will first describe roughly what needs to be done, and then give a few specific lines that you should add at the appropriate place in your Apache config.

Your Apache should be set up so that:

  • Access to your instance directory is denied (sane Apache installations should actually deny access to the whole server, and then only allow a few specific directories).
  • An Alias is set up to redirect requests from /moin_static160/ (in the URL - see also url_prefix_static configuration variable) to the htdocs directory (in the share directory, as discussed at the bottom of ../BasicInstallation). Please note that url_prefix_static will change with every moin release!

  • A ScriptAlias is set up to redirect requests from whatever you want (we suggest you use your instance name, for example /mywiki) to the CGI script you just copied.

The following commands will add two lines at the bottom of your Apache config file. These lines only cover the last two items listed above. You have to check the first one by yourself (there is too much variation in Linux distributions). Note that you may have to move the two lines to the appropriate place in your config file -- maybe near other similar lines.

> echo "" >>/etc/httpd/httpd.conf
> echo "Alias /moin_static170/ \"$SHARE/htdocs/\"" >>/etc/httpd/httpd.conf
> echo "ScriptAlias /mywiki \"$WIKILOCATION/$INSTANCE/cgi-bin/moin.cgi\"" >>/etc/httpd/httpd.conf

So this would add two lines like the both below to a config file (possibly you use one for each virtual server):

Alias /moin_static170/ /usr/local/share/htdocs/
ScriptAlias /mywiki /usr/local/share/moin/mywiki/cgi-bin/moin.cgi

You only need to define the Alias for htdocs once, no matter how many wikis you run with the 1.6.0 version of moin. You need to define a different script alias for each wiki instance you intend to run. So you could also define the Alias in a central Apache configuration file and only define the ScriptAlias in virtual host configurations.

Configure MoinMoin

Finally, check that the wikiconfig.py file in the instance directory contains correct paths for:

  • url_prefix_static (static stuff like css/img/js)

  • data_dir (the instance data directory) and

  • data_underlay_dir (the instance underlay directory).

You can use relative paths for the directories, but note that they are relative to the CGI script, not the configuration file! Better use absolute paths, and save yourself some headaches.

Here are the settings you should have in the config file if you followed all our suggestions:

    data_dir = '../data/'  # better use absolute path
    data_underlay_dir = '../underlay/'  # better use absolute path
    url_prefix_static = '/moin_static160' # depends on moin version

There are other settings you will likely want to alter, look at the bottom of ../WikiInstanceCreation for more details about them.

Test the wiki

Everything should work fine now. It is time to restart the Apache server (usually with "/etc/init.d/apache restart", sometimes with "apachectl restart") and perform the following steps:

  • Access your new wiki with the URL "http://127.0.0.1/mywiki/" (or the name and port you have defined in the Apache configuration file). You should see some wiki page - read it.

  • Then go to the WikiSandBox page.

  • Try to edit it and save your changes.
  • If that works, see if your edit is reflected on the RecentChanges page.

  • If you see them, congratulations, your new wiki works! :)

If something goes wrong, have a look at Troubleshooting, at the bottom of this page.

Simple User Scenario

On machines shared by many people, simple users typically have no access to the root account, cannot modify the httpd.conf file, and cannot copy files into the system-wide cgi-bin and htdocs directories. In that case, Apache can be set up so that each user can host a web site in the home directory of his or her shell account, using the UserDir directive. If the machine administrator decides to use it, all URLs that start with "/~username" will be redirected to a directory in the users' home directories, where they have write permission and can install MoinMoin.

As an example, we will consider the case of a user named "mm". Of course, wherever you see "mm" below, you will replace it with your own username.

Make sure /~username works

The home directory installation can only work if the administrator (root) has allowed it. So, the first step is of course to check that it works. Typically, Apache is set up so that the public_html subdirectory in the home directory is used as the web site root. So, the first first step is to check if that directory exists.

> ls -ld ~/public_html
drwxr-xr-x   2 mm       users        4096 Nov 30 00:29 public_html

If the directory does not exist, create it, and be sure it can be read and entered by the web server.

> mkdir public_html
> chmod a+rx public_html
> ls -ld ~/public_html
drwxr-xr-x   2 mm       users        4096 Nov 30 00:35 public_html

Now, check if the "/~mm" URL works:

> lynx -error_file=/dev/stderr -dump http://localhost/~mm/ >/dev/null
URL=http://localhost/~mm/ (GET)
STATUS=HTTP/1.1 200 OK

If you get a "200 OK" response code, then it works, and you can go on to the next check. If you get a "403 Forbidden" or a "404 Not Found" response, then maybe something is wrong with your directory, or maybe the whole thing has not been enabled by your administrator.

  • Check the permissions for your home directory (~) and your public_html directory. The first one should at least end with "--x", and the second one, as we saw above, with "r-x".

  • It also possible that the administrator has set up another name for the personal web site directory. "public_html" is just the usual default, but anything can actually be used. There is no way to know, you have to ask the administrator (root).

  • Finally, if the personal web site feature is disabled, maybe you can ask the administrator to enable it?

Once you have checked you can read the files in the directory, you need to check that you are also able to execute CGI scripts in that directory. Use the following commands to create a simple CGI script in the appropriate location:

> mkdir -p ~/public_html/cgi-bin
> cat > ~/public_html/cgi-bin/test.cgi
#!/bin/sh
echo Content-Type: text/plain
echo
echo "CGI scripts work"
<CTRL-D>
> chmod a+rx ~/public_html/cgi-bin/test.cgi
> lynx -dump http://localhost/~jh/cgi-bin/test.cgi
CGI scripts work

If you get anything else than "CGI scripts work", then something went wrong. Check the directory permissions as above, try other names (or ask about them). The sad truth might be that you are not allowed to execute CGI scripts. You would then have to ask the administrator (root) for that permission.

Once you get it, you can set up your wiki instance in the public_html directory. :)

Create a wiki instance

Creating a wiki instance involves copying files around and setting appropriate permissions. Read ../WikiInstanceCreation and follow the steps described there.

Install the htdocs files

The web server needs to access these files, so we need to copy them into the "public_html" directory. Just use this:

> cd ~/public_html
> cp -R ~/share/moin/htdocs moin_static170
> chmod -R a+rX moin_static170

Install moin.cgi

There is one last file you need to copy, the bridge between Apache and MoinMoin: the CGI script that Apache will call every time a wiki page is requested, and that will in turn invoke all the MoinMoin components to handle the request. You need to put this file in a directory for which CGI scripts execution is enabled. By default, this should work:

> cd ~/public_html
> mkdir cgi-bin
> cp $SHARE/server/moin.cgi cgi-bin
> chmod -R a+rx cgi-bin

Configure moin.cgi

When moin.cgi is launched, it imports a MoinMoin module (that in turn imports other modules and the configuration file). Since everything has been installed in your home directory, it is likely none of these will be found. Edit the moin.cgi script to correct that. Add these lines near the top of the file:

import sys
sys.path.insert(0, '/home/mm/lib/python2.4')
sys.path.insert(0, '/home/mm/lib/python2.4/site-packages')
sys.path.insert(0, '/home/mm/share/moin/mywiki')

Of course, you need to adapt the paths to your situation. The first two lines should help locate the MoinMoin modules, the last one should help locate the wikiconfig.py file.

Note: You might also need to edit the first line of the file, to point to the correct version of Python. The default should be fine, but a line like "#! /usr/bin/python2.4" might help you if the default does not work.

Note 2: In this file there is a line reading request = RequestCGI(). If you have a complex mod_rewrite case, you might want to add properties = {'script_name': '/mywiki'}  in the parentheses. This will let MoinMoin generate URLs that start with /mywiki and not the path that the webserver passed to MoinMoin:

def handle_request(req, env, form):
    request = RequestCGI(req, env, form, properties = {'script_name': '/mywiki'})
    request.run()

Configure MoinMoin

Finally, check that the wikiconfig.py file in the instance directory contains correct paths for url_prefix_static (the htdocs directory), data_dir (the instance data directory) and data_underlay_dir (the instance underlay directory). You can use relative paths for the directories, but note that they are relative to the CGI script, not the configuration file! It is better to use absolute paths, and save yourself some headaches.

    data_dir = '/home/mm/share/moin/mywiki/data/'
    data_underlay_dir = '/home/mm/share/moin/mywiki/underlay/'
    url_prefix = '/~mm/moin_static170'

Test the wiki

Everything should work fine, now. It is time to perform the following steps:

  • If it worked, try to access your new-born wiki with the URL "http://127.0.0.1/~mm/cgi-bin/moin.cgi". You should see some wiki page - read it.

  • Now go to the WikiSandBox page.

  • Try to edit it and save your changes.
  • If that works, see if your edit is reflected on the RecentChanges page.

  • If you see them, congratulations, you have a new wiki! :)

If something goes wrong, have a look at Troubleshooting, below.

Troubleshooting

See also ../TroubleShooting for generic stuff.

The first thing to do when your wiki does not work as expected is to issue the command "tail /var/log/httpd/error_log" to display the most recent errors. Usually, you will get a hint on what went wrong, like missing file system permissions.

Adding permission to serve the htdocs directory

In some (sane) Linux distributions (like SuSE 9.0) serving directories other than the document-root "/srv/www/htdocs" with Apache is switched off by default for security reasons in "/etc/httpd/httpd.conf" (or for Apache2 "/etc/apache2/httpd.conf"):

# forbid access to the entire filesystem by default
<Directory />
  Options None
  AllowOverride None
  Order deny,allow
  Deny from all
</Directory>

To allow Apache to serve directories outside of the document root you have to add these lines to "/etc/httpd/httpd.conf" (in SuSE it is recommended to create a new "http.conf.local" and include this file in "/etc/sysconfig/apache2"):

Alias /wiki/ "/usr/share/moin/htdocs/"
<Directory "/usr/share/moin/htdocs/">
   Order deny,allow
   Allow from all
</Directory>
ScriptAlias /mywiki "/usr/share/moin/mywiki/cgi-bin/moin.cgi"
<Directory "/usr/share/moin/mywiki/cgi-bin">
   Order deny,allow
   Allow from all
</Directory>

Of course, you need to adapt the paths to your particular situation.